N369 Bluetooth Single-Zone Smart Water Timer with Alexa Google Control, Rain Delay & Cycle ModeItem NO.: SPY-369

🌱 Smart Voice Control & Family Sharing: Easily control your watering schedule with voice commands - compatible with Alexa and Google Assistant for seamless smart home integration. Share device access with family members via the app for collaborative garden care.

🌱 User-Friendly APP Interface: The user-friendly app displays real-time battery status, 7-day weather forecast, and temperature trends. You can also view the last and next watering times at a glance for effortless monitoring and scheduling.

🌱 Versatile Watering Modes: Supports up to 10 customized programs, 10 cyclic watering plans, and temporary watering from 1 minute to 24 hours. Manual watering via the physical button defaults to 10 minutes. Flexible modes let you handle various garden and plant care scenarios with ease.

🌱 Rain Delay & Irrigation History Tracking: Avoid overwatering with adjustable rain delay settings (24h, 48h, 72h) or disable as needed. The app records detailed irrigation history, allowing you to track usage and fine-tune watering plans for optimal plant health.

🌱 Wide Application with Smart Alerts: Suitable for home gardens, lawns, and outdoor irrigation. Operates under 0.1-0.8MPa pressure and 4.5°C-45°C temperature. Rated IPX5 waterproof with low battery alerts via call/SMS (paid) or app/phone alerts (free). Ensures uninterrupted operation and timely updates.


Specification:
• Product Name: N369 Bluetooth Single-Zone Timer.
• Power Supply: 2 * AA alkaline batteries (NOT included).
• Communication Protocol: Bluetooth.
• Material: UV-resistant ABS.
• Inlet Size: 3/4'' thread.
• Operating Pressure: 0.1~0.8 MPa (14~116 psi).
• Working Temperature: 4.5°C~45°C (40.1°F~113°F).
• Waterproof Rating: IPX5.
• Usage: For Outdoor or indoor Use.
• Rain Delay: 24h, 48h, 72h or close.

N369 Single-Zone Setup Information:
• Temporary Watering: App: 1 min - 24 hrs / Button: 10-min.
• Programmable Modes: Normal Schedule / Cycle & Soak.
   - Normal Schedule: 
     • Number of Programmable Schedules: Up to 10. 
     • Start Time: 00:00 - 23:59. 
     • Irrigation Duration: 1 min - 24 hrs (Min Unit: 1 min).
     • Irrigation Frequency: Sunday to Saturday.
   - Cycle & Soak: 
     • Number of Programmable Schedules: Up to 10. 
     • Start Time: 00:00 - 23:59. 
     • End Time: 00:00 - 23:59.
     • Irrigation Duration: 1 min - 24 hrs (Min Unit: 1 min). 
     • Irrigation Frequency: Sunday to Saturday.
     • Soak Duration (Pause Time): 1 min - 24 hrs (Min Unit: 1 min). 
• Voice Function: Alexa, Google assiatant.


⚠ Note:
1. Minimum Water Pressure Requirement:
    • The N368 solenoid valve requires a minimum operating water pressure of 0.1 MPa (14.5 psi) to function correctly.
    • Insufficient water pressure may cause the valve to fail to open or only partially open, resulting in little or no water flow.
    • Do not connect the valve to non-pressurized water sources such as gravity-fed tanks or ton barrels.

2. Operation During Network or Bluetooth Disconnection:
    • In the event of Bluetooth or network disconnection, the timer will continue to run according to the pre-programmed schedules stored in the app.
    • Ensure all watering schedules are properly set in advance to avoid interruptions.
    • Note: Remote control requires a Bluetooth gateway, which is not included in this product listing.

3. Installation and Usage:
    • Always connect the valve to a pressurized water source.
    • Avoid installing the device in areas exposed to extreme heat, frost, or prolonged direct sunlight.
    • Use stable and high-quality batteries to maintain reliable operation and prevent malfunctions.

4. Maintenance and Safety:
    • Periodically inspect the system for leaks or blockages.
    • Clean the valve regularly to prevent debris buildup that could impact performance.
    • Do not disassemble the valve unless absolutely necessary; improper handling may lead to irreversible damage.